UGN Security Forums UGN Security: Underground Off Topic IceMyst's New Puter

I thought I'd share my new puter with you guys. he he he he......

Only Top Cold Cathode ON:


Only Bottom Cold Cathode ON


Both Cold Cathode Sets ON


No Cold Cathode Sets ON


those are 12" Cold Cathode UV lights he he he....

and there's the top fan


and last but not least what my puter looks light from Gizmo's view along with my desktop


the case cost $80; fan's cost about $40, Grill covers cost about $10, the cold cathrode cost $30
The power splitter cost $0.25 and the 430wat power supply cost about $55 (The one Gizmo wanted was $70, 500wat LED super quiet).

The room makes a low humming noise at night, and to Gizmo it looks like a whore house but I say it needs red lights to be that. The room just looks like it's on crack. and to think i still have to put the front fan on. he he he he he he he he

Nice Case = ) (and pretty cheap)
The Case i bought for this comp cost about $80 (Canadian) with the power supply.. But doesent look close to as nice as urs =)

Looks very nice thou.

Yeh it's a nice case; a lot less work than modding a standard case ...

Not bad, but i would clean op those wires, it's a mess

the sad part is that is clean

sexy!

why thank you

Only mess I see are the wires from the fan's, which can't exactly be delt with as you need to be able to open the side pannel.

The rest of the wires are all rounded, I may take some electrical tape to the fan wires and the cold cathode; although we need to get something much stronger than the standard double sided tape they use to hold it to the top of the case (crazyglue perhaps)..