Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
I'm running vista now after a clean reboot. I decided to format and go vista because I'd [censored] up XP SP2 with just general tweaking etc over the years.

The bugs and viruses are gone but the computer restarts, BSOD and freezes for no apparent reason. This started happening during the last month of XP after a new power supply unit was installed.

I would have thought the computer restarted cause of overheating but I'm not sure why the freezing.

Any ideas? I might need new or more ram. (Currently 2gb DDR3)

I thought formatting and upgrading to Vista would solve the shutting down and freezing problem. Sounds like hardware.

Could be RAM
Overheating
I don't think it is the CPU.
Started happening when the PSU was replaced.
I don't think it is the mobo

I do think it might actually be the graphics card which is hot and usually the computer freezes when I am loading a video. (But not always).

What to do?

Last edited by Artic Warrior; 03/02/10 11:15 AM.

Joined: Feb 2002
Posts: 7,203
Likes: 11
Community Owner
Offline
Community Owner
Joined: Feb 2002
Posts: 7,203
Likes: 11
Why Vista? Why not W7? In W7 I'd say to go look in the "Solve PC Issues" screen (on the flag with an X) and it'll say why your pc restarted; not in Vista.


Donate to UGN Security here.
UGN Security, Back of the Web, and VNC Web Services Owner
Joined: Sep 2002
Posts: 553
UGN Super Poster
Offline
UGN Super Poster
Joined: Sep 2002
Posts: 553
It could be any of the above ... your best bet is to test each component individually.

For testing the RAM I suggest a bootable cd with memtest86+ on it (Ubuntu instalation disk has it, also Hiren CD has memtest on it). Let it perform at least 3 passes.

For testing the video, download ATITool and let is find artifacts for a half an hour. This tool also works on nVidia cards.

To see if the computer overheats, after a blue screen or reboot, check the BIOS and see the overall temperature and/or CPU temperature. If it's almost at the limit it might be overheating. Try reproducing the blue screen while leaving your computer case open and using a normal fan to keep a steady airflow on the components. If while you're doing this the computer is ok, you might want to buy an extra fan or two for your case.

For mobo Hiren Boot CD also has a few tests on it but I can't recommend any since I haven't used them

For the power source, try to measure and check the voltage output.

Also what Gizmo said, get W7, it's way better than Vista.

Good luck. Do let us know how this turns out.

Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
Will definitely try some of these tests. I think it is the power supply or the heating. I did check the temperature and my mate said it was hot. How do you know what the max temp should be?

Also I have noticed that the normal fan stops spinning while the computer is on for about a few seconds, it then starts up again.

I want windows 7, just looking for the cheapest option. Once they offered it for like $30-$50 if you were a student. I can't find that anymore, deal is probably gone.


Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
ATITool found no artifacts after 30 mins.

Temperature tested immediately after system crash restart:

CPU: 52*C or 126F
M/B temp: 40*C or 104F

I only have one fan.
Fan speed is 2667RPM

What voltage specs do i look at when in bios setup?

Vcore voltage was 1.26V but I don't yet know what that means... google.

Note: BSOD displayed this error:
PFN_LIST_CORRUPT

google tells me it is RAM related smirk

Last edited by Artic Warrior; 03/18/10 04:15 PM.

Joined: Feb 2002
Posts: 7,203
Likes: 11
Community Owner
Offline
Community Owner
Joined: Feb 2002
Posts: 7,203
Likes: 11
I don't know too many people who aren't running the Release to Manufacture version :P


Donate to UGN Security here.
UGN Security, Back of the Web, and VNC Web Services Owner
Joined: Sep 2002
Posts: 553
UGN Super Poster
Offline
UGN Super Poster
Joined: Sep 2002
Posts: 553
The temp seems to be within limits.

You must run memtest86+ it's the best ram test you'll ever find. Also if you have some fancy DDR3 memory kit, make sure you have them plug in the correct slots on the mobo (you should find some specs in the manual regarding the triple channel setup and all that).

Also when testing the ram, you must do several test. 1. Test the memory modules they way they are set up now. 2. In case you get errors and you have more than 1 module, test each module alone on all the slots.

If one module gives error on more than one slot it's the module. If both modules give errors on the same slot, that memory slot on the mobo might be the problem.

Also (with the risk of Gizmo editing my post but hopefully since I'm part of the somewhat active members here, he won't :D) why would you pay for Windows 7? Just download it.

Joined: Feb 2002
Posts: 7,203
Likes: 11
Community Owner
Offline
Community Owner
Joined: Feb 2002
Posts: 7,203
Likes: 11
I agree, memtest will test the everloving crap out of your memory and tell you what doesn't pass par... A bad stick of ram will cause memory issues and cause rebooting and bsod's.

And DG, I mentioned that when I said most people running W7 are running the RTM :P


Donate to UGN Security here.
UGN Security, Back of the Web, and VNC Web Services Owner
Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
Doing memtest next.
I really thought the temp was a bit high. Just so you know, the computer freezes, BSOD, and sometimes just restarts.
Working on getting Win7 for free.

Also I do not have DDR3. Just two 1GB ddr2.

-----------------------

I have a question: I heard that when I put win7 on it will only be able to detect 2gb of ram unless I go 64bit. Is that the case?


Joined: Feb 2002
Posts: 7,203
Likes: 11
Community Owner
Offline
Community Owner
Joined: Feb 2002
Posts: 7,203
Likes: 11
Well a bad stick of ram would cause those three issues, just FYI


Donate to UGN Security here.
UGN Security, Back of the Web, and VNC Web Services Owner
Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
[censored] sick of non of the memtets working as an image file.


Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
Im having trouble making a disc image file dvd.
The nero software im using is new enough to handle it but it can't find the correct supported files in the locations I am sure the memtest and win7 .iso files are in.

It is really irritating.


Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
Ok so I finally figured it out and got win7 on my pc.
It is very smooth. Feels better then Vista. I like it.

Still, the pc is restarting/freezing etc but not at all as much.
Will look into it.

Thanks for the link. I think I will stay on win7.

--

I was on xp for 6 years
I was on vista for 6 days, no joke.


Joined: Feb 2002
Posts: 7,203
Likes: 11
Community Owner
Offline
Community Owner
Joined: Feb 2002
Posts: 7,203
Likes: 11
Well, if your memory is screwed up it'll reboot (well, at least cause some sort of malfunction) on ANY operating system...


Donate to UGN Security here.
UGN Security, Back of the Web, and VNC Web Services Owner
Joined: Sep 2002
Posts: 553
UGN Super Poster
Offline
UGN Super Poster
Joined: Sep 2002
Posts: 553
Download ubuntu, burn the .iso image, boot the dvd, select your language and after that select test memory.

[Linked Image]

Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
I ran the win7 mem test and it found no issues.
I also figured out how to make the image file boot disks.

SO I think it is the mobo, or cpu.
Win7 BSOD's and I get this message as it crash dumps on self reboot.

"A clock interupt was not recieved on a secondary processor within the allocated time"

I googled the problem and quite a few people out there had the same symptons of random freeze/restarts. But none had answers.


Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
I'll probably buy a new (old) motherboard. Keep all the other bits.
Should probs only cost $50 and last another year.


Joined: Nov 2003
Posts: 478
A
UGN Member
OP Offline
UGN Member
A
Joined: Nov 2003
Posts: 478
It may very well be the mobo.
After a friend got a new computer, I got his old ram and put it into my machine. His ram wouldn't register. I just got this continuous beep on start up. I tried every combo in the available 4 slots.

ANYWAY, I just went back to using my original 2GB of ramm (2x1GB) and since that day the pc has not restarted or froze or BSOD.

The pc registered only 1 of the sticks of ram at first and I thought that meant the other one was bust. Just then I put the supposed bust ram into another slot and it is registering. Currently I am using 1.5GB of Physical memory and no system shutdowns are occuring.

SO it was either the ram or the mobo?

I think the problem is solved. Will keep you guys posted if I run into any errors.


Joined: Feb 2002
Posts: 7,203
Likes: 11
Community Owner
Offline
Community Owner
Joined: Feb 2002
Posts: 7,203
Likes: 11
Some ram requires that you manually enter the memory clock data in the advanced settings, so it could be something quirky like that...


Donate to UGN Security here.
UGN Security, Back of the Web, and VNC Web Services Owner

Link Copied to Clipboard
Member Spotlight
Posts: 43
Joined: November 2002
Forum Statistics
Forums41
Topics33,840
Posts68,858
Average Daily Posts1
Members2,176
Most Online3,253
Jan 13th, 2020
Latest Postings
Where and how do you torrent?
by danni75 - 03/01/24 05:58 AM
Animation,
by JohanKaariainen - 08/15/19 01:18 AM
Blackbeard.....
by Gremelin - 10/03/18 07:02 PM
my old account still exists!
by Crime - 08/10/18 02:47 PM
Okay WTF?
by HenryMiring - 09/27/17 01:45 AM
The History Thread...
by Gremelin - 08/11/17 12:11 PM
My friend NEEDS your HELP!
by Lena01 - 07/21/17 12:06 AM
I'm having fun with this guy.
by gabithompson730 - 07/20/17 01:50 AM
I want to upgrade my phone
by gabithompson730 - 07/20/17 01:49 AM
Doom 3
by Cyrez - 09/11/14 08:58 PM
Amazon Gift Card Generator/KeyGen?te
by Gecko666 - 08/22/14 09:21 AM
AIM scene 99-03
by lavos - 09/02/13 08:06 AM
Planetside 2
by Crime - 03/04/13 07:10 AM
Beta Testers Wanted
by Crime - 03/04/13 06:55 AM
Hello Everyone
by Gremelin - 02/12/12 06:01 PM
Tracfone ESN Generator
by Zanvin Green - 01/18/12 01:31 PM
Python 3 issue
by Testing - 12/17/11 09:28 PM
tracfone airtime
by Drache86 - 07/30/11 03:37 AM
Backdoors and the Infinite
by ZeroCoolStar - 07/10/11 03:52 AM
HackThisZIne #12 Releaseed!
by Pipat2 - 04/28/11 09:20 PM
gang wars? l33t-wars?
by Gremelin - 04/28/11 05:56 AM
Consolidate Forums
by diggin2deep - 04/21/11 10:02 AM
LAN Hacking Noob
by Gremelin - 03/12/11 12:42 AM
Top Posters
UGN Security 41,392
Gremelin 7,203
§intå× 3,255
SilentRage 1,273
Ice 1,146
pergesu 1,136
Infinite 1,041
jonconley 955
Girlie 908
unreal 860
Top Likes Received
Ghost 2
unreal 1
Crime 1
Ice 1
Dartur 1
Powered by UBB.threads™ PHP Forum Software 7.7.5